MOTOGADGET CLASSIC TACHOMETER 10,000 RPM black

MOTOGADGET CLASSIC TACHOMETER 10,000 RPM black

This Motoscope classic from Motogadget is a versatile digital instrument that allows you to replace your speedometer, your tachometer up to 8000 rpm, and your indicator lights.
The dimension is 85 mm in diameter (80 mm for the body) and 34 mm in depth; it features a classic round housing, a white dial, and a red indicator needle driven by a precision stepper motor. The LCD screen and four LED indicators display the numerous functions accurately and reliably. The LCD screen allows you to display speed, or you can combine it with the Motoscope classic speedo.
The design matches all types of modern or vintage machines, whether it's a classic motorcycle, youngtimer, custom, or sportbike. Premium materials, handcrafted assembly, and meticulous quality control provide the highest possible quality in terms of functionality and appearance, made in Germany.
The high-quality aluminum housing is turned and machined from a block of aluminum using CNC technology. The surface is first brushed and then anodized in black or natural aluminum depending on the chosen model. The housing is 100% waterproof. The viewing glass is made of special scratch-resistant plastic. The readability of the engine speed is optimal thanks to the red needle on the white dial.
The screen remains readable and backlit even when directly exposed to sunlight. You can choose different display measurements on this screen (speed or other indications...) via a push button included in the kit. Four ultra-bright indicators complete the instrument. The red LED acts as a warning light when you reach the defined threshold for engine speed (Shiftlight), air, water, or oil temperatures (min./max.), oil pressure reading (min./max.)... Different warnings are easily distinguishable by different patterns, either flashing or via continuous lighting that you can choose during setup. Default settings or recorded values will, of course, be retained in memory even if the power is cut off. The connection cable is approximately 55 cm long and the connectors are already pre-installed on the instrument side.
The engine speed measurement input can be easily connected to the ignition coil or ignition box depending on your motorcycle model. The stainless steel speed sensor is included; it is very discreet (M5/22 mm), and you can connect it effortlessly to the front or rear wheel via the 1.5 m connection cable.
We offer optional sensors for optimal measurements of air, oil, and water temperature as well as oil pressure (optional, see details below).

Details:
Material: aluminum
Color: black housing, black bezel on white background with a red needle
Analog engine speed 0 - 8 / 10 / 14,000 rpm
Engine speed on LCD 0 - 20,000 rpm
Digital speed 200 - 350 Km/h or mp/h
Partial distance (daily) 0 - 999.99 km
Total distance 250,000 km
Travel time 0 - 99:59 h / min
Configurable shift light from 0 to 20,000 rpm
Voltage 9 - 18 V
Low voltage alarm activates if below 11 V
Instantaneous acceleration 0 to +/- 2 G
Average speed and V Max 0 - 350 km/h - mp/h
Max rpm 0 - 20,000 rpm
Max positive acceleration 0 to +2 G
Max negative acceleration 0 to -2 G
Engaged gear ratio 0 to 6
Green LED Neutral
Yellow LED Turn signals
Blue LED High beams
Red LED Alarm of choice
Air temperature (or water) -20°C +80°C with alarm level
Water temperature (or air) +40°C +120°C with high/low alarm
Oil temperature +40°C +160°C with high/low alarm
Oil pressure 0 - 8 bars with high/low alarm
Timing 0-100 km/h 0 to 99.9 sec
Warranty 2 years
Dimensions and weight 80 x 34 - weight 230g

Options:
MG19001002 Temperature sensor M10x1
MG19001007 Temperature sensor M12x1.5
MG19001004 Temperature sensor M14x1.5
MG19001001 Air temperature sensor
MG19001020 Oil pressure sensor M10x1
MG19001005 Temperature sensor M18x1.5

Displayed model speed 200 km/h - black housing - black bezel - white background - red needle
Quality "made in Germany" - by Motogadget