Chrono Classic Dark Edition Black Outline Motogadget

Chrono Classic Dark Edition Black Outline Motogadget

This Chronoclassic Speedo tachometer from Motogadget DARK EDITION is a versatile digital instrument that allows you to replace your speedometer, tachometer, and indicator lights.
The dimensions are 85 mm in diameter (80 mm for the body) and 34 mm in depth, featuring a classic round case, a black dial, and a white indicator needle driven by a precision stepper motor. The black LCD screen and four LED indicators display numerous features accurately and reliably. The LCD screen can show the tachometer, or you can combine it with the Chronoclassic tachometer.
The design fits well with all types of machines, whether modern or vintage, including classic bikes, youngtimers, custom, or sport bikes. High-quality materials, hand assembly, and meticulous quality control ensure the highest possible quality in terms of functionality and appearance, made in Germany.
The aluminum housing of the Chronoclassic is high quality, turned and machined from a block of aluminum using CNC technology. The surface is first brushed and then anodized in black or natural aluminum depending on the selected model. The housing is 100% waterproof. The viewing glass is made from special scratch-resistant plastic.
The display remains readable and backlit even when directly exposed to sunlight. You can choose different display measurements on this screen (speed or other indicators...) via a push button provided in the kit. Four ultra-bright indicators complete the instrument. The red LED acts as a warning light when you reach the defined threshold for the RPM (Shiftlight), air, water, or oil temperatures (min./max.), oil pressure readings (min./max.)... Different warnings can be easily distinguished by different patterns, either flashing or continuous lighting that you can choose during setup. The default settings or stored values will, of course, be retained in memory even if the power is turned off. The connection cable measures about 55 cm long, and the connectors are already pre-installed on the instrument side.
The engine RPM measurement input can be easily connected to the ignition coil or ignition unit depending on your bike model. The stainless steel speedometer sensor is included, and it is very discreet (M5/22 mm); you can effortlessly connect it to the front or rear wheel using the 1.5 m connection cable.

We optionally provide appropriate sensors for optimal measurements of air, oil, and water temperatures, as well as oil pressure (optional, see details below).

Details:
Material: aluminum
Color: black housing, black bezel, black screen on black background, and white needle
Engine RPM 0 - 20,000 rpm
Digital speed 200 - 350 km/h or mph
Analog speed 0 - 200 km/h or mph
Partial distance (daily) 0 - 999.99 km
Total distance 250,000 km
Travel time 0 - 99:59 h/min
Shiftlight configurable from 0 to 20,000 rpm
Voltage 9 - 18 V
Low voltage alarm activates if below 11 V
Instantaneous acceleration 0 to +/- 2 G
Average speed and V Max 0 - 350 km/h - mph
Max RPM 0 - 20,000 rpm
Max positive acceleration 0 to +2 G
Max negative acceleration 0 to -2 G
Engaged gear ratio 0 to 6
Green LED Neutral
Yellow LED Turn signals
Blue LED High beams
Red LED Alarm of choice
Air temperature (or water) -20°C +80°C with alarm level
Water temperature (or air) +40°C +120°C with high/low alarm
Oil temperature +40°C +160°C with high/low alarm
Oil pressure 0 - 8 bars with high/low alarm
Timing 0-100 km/h 0 to 99.9 sec
Warranty 2 years
Dimensions and weight 80 x 34 - weight 230g

Options:
MG19001002 Temperature sensor M10x1
MG19001007 Temperature sensor M12x1.5
MG19001004 Temperature sensor M14x1.5
MG19001001 Air temperature sensor
MG19001020 Oil pressure sensor M10x1
MG19001005 Temperature sensor M18x1.5

Model shown speed 200 km/h - black housing - black trim - white background - red needle
Quality "made in Germany" - by Motogadget