MOTOGADGET VINTAGE Brass SPEEDOMETER

MOTOGADGET VINTAGE Brass SPEEDOMETER

The Motoscope Vintage speedometer is a small analog speedometer with a brass bezel in an attractive "old school" look. The design differs from the Tiny and Speedster models, but technically it is identical to them. The dial is based on the clean design of the 1940s and 50s. Additionally, it features a yellowed and cracked surface that gives the dial its extremely aged appearance. The bezel and needle are made of solid brass and have been manually coated with patina. The patterns created and signs of aging vary with each instrument, giving it an individual and unique look.

There is a special matching Streamline housing available for the Motoscope Vintage - made of solid brass with patina (MG15005027 or MG15005017).

The high-quality aluminum housing is machined and its surface is anodized black. The innovative LED display is hidden behind the black part of the dial and becomes invisible when turned off. A brightness adjustment is directly integrated into this speedometer for optimal readability in all conditions.

If the speed exceeds 200 km/h on the analog scale, it is automatically displayed on the LED screen. The maximum speed is also recorded in memory. The 4 indicator lights (blue, red, and 2 x green) are also integrated into the dial. These lights are only visible when the speedometer is powered on.
You can toggle between different display information on the LED screen by pressing the menu push button (included in the kit). The default display on the screen is the time. If needed, a brief press of the push button will show the total mileage, a trip, or voltage values.

The Motoscope Vintage is easy to install thanks to the two M3 threaded holes at the back. There are different Motogadget mounts available for installation. A speed sensor is included; it is made of stainless steel, very discreet (M5/23 mm), and therefore easy to hide. The sensor can be easily installed on the front or rear wheel with the connection cable (1.5 m long). This speedometer is compatible with various original electronic speed sensor manufacturers' motorcycle models. An intelligent pairing function allows for easy speed calibration, even on vehicles equipped with transmission sensors, such as Harley Davidson.

Detail:
Black housing
Brass bezel
Material: aluminum
Aged white and black dial with brass needle
White backlighting
Diameter 49 mm.
Weight approximately 96 grams.
Operating voltage 9 V - 15 V.
Operating temperature -20° to +80°C.
Analog speed indicator (needle indicator) 0 to 200 km/h or mph.
Digital speedometer (LED display) 200 to 999 km/h or mph.
Maximum speed 0 to 999 km/h or mph.
Onboard voltage indicator 9 to 15 V.
Clock 00:00 to 23:59.
Trip meter: 0 to 999.9 km or miles.
Total distance 99999 km or miles max.
Indicator light: turn signals (green), high beams (blue), neutral (green), warning (red).
Instrument with approximately 75 cm connector cable.
Mini push button.
2 removable fuses.
9 cable end connectors.
Speed sensor (fine thread M5 x 0.5, stainless steel, IP 68) with 150 cm connector cable.
2 powerful neodymium mini magnets.
2 M3 mounting screws with washer.
2 diodes for turn signals.
2-year warranty

Quality "made in Germany" - by Motogadget.