KIT QUICK SHIFTER EQS BATTERYLESS WITH TRACTION SENSOR 2T/4T CDI

KIT QUICK SHIFTER EQS BATTERYLESS WITH TRACTION SENSOR 2T/4T CDI

Autonomous battery-free SP electronic shifter kit with sensor on push rod, sensor mounting in traction:

The Sp Electronics EQS shifter kit allows you to shift gears on the fly without cutting the throttle or touching the clutch, thus saving you time during your runs and competitions on your 50 cc as well as on all other displacements. A micro cut is made at ignition with each press on the sensor located on the push rod. The sensor presented here is a compression sensor, which means it compresses when you upshift. For the installation of this sensor, we recommend also ordering the appropriately sized rod, that is, the length of your original rod – 50mm (link to order the rod here).

This complete kit with electronic box, sensor, and wiring harness is very easy and quick to install. This SP Electronic shifter kit is specifically designed for all single-cylinder motorcycles of supermotard, cross, enduro, 2-stroke or 4-stroke carbureted types only, and it is also particularly suited for PVL ignitions (Most or Bidalot) or MVT DD. For example, internal rotor ignitions Derbi and AM6 of your 50cc, battery-free, but also carbureted 4-stroke engines like pit bikes or mini GP (ohvale, bucci, YCF…).

The CDI box and the coil must be of the type separated by a wire for the installation of the shifter. You can adjust the cut time from 40 to 64 ms using 12 micro switches. Dimensions of the box are 70x35x20 mm.

You can install this kit on all your 50cc Derbi, Sherco, Rieju, Beta, Fantic, Aprilia, Yamaha…

List of applications: Rieju MRT and Rieju RS3 50 and RS3 Naked, Beta RR, Sherco 50, Masai, Fantic TX 180, Gilera SMT, MagPower, Mash Fifty 50, Archive 50, Yamaha 50 DTR, Yamaha TZR 50, Aprilia RS 50, Yamaha Roadster 50, Gilera SMT50, Sherco SM50, Derbi Senda DRD X-trem 50 SM…

The kit includes:

• The Ebox EQS electronic box
• The plug and play wiring harness
• The chosen sensor