DTI IGNITION SHIFTER KIT CYLINDER SENSOR PUSH

DTI IGNITION SHIFTER KIT CYLINDER SENSOR PUSH

Autonomous SP electronic shifter kit without battery with sensor on push rod, sensor mounting on push cylinder:

The Sp Electronics EQS shifter kit allows you to shift gears on the fly without cutting the throttle or using the clutch, thereby saving you time during your runs and competitions on your 50cc as well as on all other displacements. A micro-cut is made at ignition with each press on the sensor located on the push rod. The sensor presented here is a compression sensor, which means it compresses when you upshift. For the installation of this sensor, we recommend also ordering the appropriate length rod, that is, the length of your original rod – 50mm (link to order the rod here).

This complete kit with electronic box, sensor, and wiring harness is very easy and quick to install. This SP Electronic shifter kit is specifically designed for all single-cylinder motorcycles of the supermotard, cross, enduro types, 2-stroke or 4-stroke with carburetor only; it is also particularly suited for PVL ignitions (Most or Bidalot) or MVT DD. For example, the internal rotor ignitions Derbi and AM6 of your 50cc, without battery, but also 4-stroke carbureted engines like pit bikes or mini GP (ohvale, bucci, YCF…).

The CDI box and the coil must be of the separated type by a wire for shifter installation. You can adjust the cut time from 40 to 64 ms using 12 micro switches. Dimensions of the box are 70x35x20 mm.

You can install this kit on all your 50cc Derbi, Sherco, Rieju, Beta, Fantic, Aprilia, Yamaha…

Application list: Rieju MRT and Rieju RS3 50 and RS3 Naked, Beta RR, Sherco 50, Masai, Fantic TX 180, Gilera SMT, MagPower, Mash Fifty 50, Archive 50, Yamaha 50 DTR, Yamaha TZR 50, Aprilia RS 50, Yamaha Roadster 50, Gilera SMT50, Sherco SM50, Derbi Senda DRD X-trem 50 SM…

The kit consists of:

• The electronic box Ebox EQS
• The plug and play wiring harness
• The chosen sensor