DTI OFFROAD IGNITION SHIFTER KIT

DTI OFFROAD IGNITION SHIFTER KIT

SP electronic autonomous shifter kit without battery with sensor on push rod, OFFROAD 2T and 4T sensor mount:

The Sp Electronics EQS shifter kit allows you to shift gears on the fly without cutting the throttle or touching the clutch, thus saving you time during your runs and competitions on your 50cc as well as on all other displacements. A micro-cut is made at the ignition with each press on the sensor located on the push rod. The sensor presented here is a compression sensor, meaning it compresses when you shift up. For the installation of this sensor, we recommend ordering the appropriate length rod, which is the length of your original rod – 50mm (link to order the rod here).

This complete kit with electronic box, sensor, and wiring harness is very easy and quick to install. This SP Electronic shifter kit is specifically designed for all single-cylinder bikes of the supermoto, motocross, enduro type, 2-stroke or 4-stroke with carburetor only. It is also particularly suitable for PVL ignitions (Most or Bidalot) or MVT DD. For example, the internal rotor ignitions Derbi and AM6 of your 50cc, without battery, but also 4-stroke carbureted engines like pitbikes or mini GP (ohvale, bucci, YCF…).

The CDI box and coil must be of the separated type by a wire for the shifter installation. You can adjust the cut-off time from 40 to 64 ms using 12 micro switches. Box dimensions are 70x35x20 mm.

You can install this kit on all your 50cc Derbi, Sherco, Rieju, Beta, Fantic, Aprilia, Yamaha…

List of applications: Rieju MRT and Rieju RS3 50 and RS3 Naked, Beta RR, Sherco 50, Masai, Fantic TX 180, Gilera SMT, MagPower, Mash Fifty 50, Archive 50, Yamaha 50 DTR, Yamaha TZR 50, Aprilia RS 50, Yamaha Roadster 50, Gilera SMT50, Sherco SM50, Derbi Senda DRD X-trem 50 SM…

The kit consists of:

• The electronic box Ebox EQS
• The plug and play wiring harness
• The chosen sensor